รายละเอียดเพิ่มเติม
Description
Overall with elasticated hood. Fastening with zip under flap (top and bottom opening). Elasticated waist and ankles. Knitted wrist. Individual airtight pack.
Size: M - L - XL - XXL
Colour: White
Materials:
Deltatek® 5000. 70% Polypropylene. 30% Polyethylene. Anti-static.
Strong points:
DELTATEK® 5000 : 70% polypropylene / 30 % polyethylene
The polyethylene film ensures greater resistance to chemical hazards and higher mechanical resistance (abrasion - tearing). Zip with self adhesive flap.
Knitted wrist.
Elasticated ankles.
Instructions for use:
The Deltatek®5000 coverall is designed for uses whereby the wearer is likely to come into contact with a limited amount of chemical splashes and toxic dusts. These coveralls offer protection against infective agents. The uses that we recommend are as follows: protection against asbestos, acid splashes, alkaline materials and water in accordance with chemical protective clothing of category 3, type 5-B and 6-B. In order to ensure that the protection is maximal, we recommend the wearer to use a solvent-resistant adhesive tape at the sleeves and the ankles and to wear a mask that is attached to the hood of the suit using the same adhesive tape. The gloves should cover the knitted cuff.
PPE DIRECTIVE 89/686/EEC
- EN 340:2003 protection clothing - general requirements
- EN 13034:2005 Protective clothing against liquid chemicals # performance requirements for chemical protective clothing offering limited protective performance against liquid chemical (type 6 and type PB[6] equipments )
- EN ISO 13982-1:2004 Protective clothing for use against solid particulates - part 1 : performance requirements for chemical protective clothing providing to the full body against airborne solid particulates (type 5 Clothing)
- EN 1149-5:2008 : Protective clothing - electrostatic properties - part 5 : Material performance and design requirements
- EN 1073-2:2002 Protective clothing against radioactive contamination # part 2 : requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination
- EN 14126:2003 : Protective clothing - Performance requirements dan test methods for protective clothing against infective agents.
Performances (class) :
- Seams strength (EN ISO 13935-2) : Class 2
- Resistance to liquid penetration (EN ISO 6530) : H2SO4 (30%) class 3
NAOH (10%) class 3
O-xylene class 3
Butan-1-ol class 3
- Repellency to liquid (EN ISO 6530) : H2SO4 (30%) classe 3
NAOH (10%) classe 3
O-xylene class 3
Butan-1-ol class 3
- Protection against radioactive particular contamination (EN 1073-2:2002 ) : class 1
- Abrasion resistance (EN 530) : Class 2
- Trapézoïdal tear resistance (EN ISO9073-4) : Class 2 - Tensile strenght (EN ISO 13934-1) : Class 1
- Puncture resistance (EN 863) : Class 2
- Flex cracking resistance (EN7854) : Class 6
- Résistance to ignition (EN 13274-4 méthode 3) : Pass
