TW400S3
สินค้าใหม่
FULL GRAIN LEATHER BOOTS - S3 HRO HI CI SRC
ไม่พบสินค้าในร้านค้า
คำเตือน: สินค้าชิ้นสุดท้ายในร้าน!
วันที่สินค้าจะเข้า
TW400 S3 SRC
FULL GRAIN LEATHER BOOTS - S3 HRO HI CI SRC
ผู้รับ: :
* ฟิลด์ที่จำเป็น
หรือ ยกเลิก
Description :
Boots range TREK WORK. Upper: Full grain leather. Lining: Polyamide Cambrelle. Insole: Removable preformed - Polyester on EVA. Midsole: Cemented - PU with Panoshock® shock absorber. Outsole: Rubber Nitrile. Non metallic footwear.
Size : 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48
Colour : Black
Materials:
Upper : full-grain leather.
Lining: polyamide
Insock (removable): polyester on PU foam.
Outsole : PU / Rubber
Composite toe cap and puncture resistent outsole (Non-metallic)
Strong points:
Water resistant.
Shock-resistant and crushproof composite toe cap 200 j. Composite puncture-proof sole.
Panoshock® energy absorbing heel.
Oil resistant bottom assembly.
Slip-resistant studded sole for loose soil.
Contact-head resistant bottom assembly (HRO). Heat-insulated sole (HI).
Cold resistance.
Anti-static protection.
Instructions for use:
General use safety footwear for smooth and oily industrial-type floors or loose ground, for indoor or outdoor use against intermediate risks equipped with a puncture-proof sole and a protective toe cap providing protection against shocks equivalent to 200 joules and against crushing risks under a maximum 15 kN load. S3: safety footwear with closed back, antistatic protection, energy absorbing heel and puncture-proof sole, water-resistant upper and studded sole.
HRO*: contact-heat resistant outsole, 300°C for 60s, HI: Heat-insulated sole, CI : sole insulated against cold.
Limits to use:
The DELTAPLUS® guarantee can only be applied optimal-condition shoes, being used without adding up any accessories likely to generate a change in protection, or it cannot be applied when its use is not specified in the current instructions for use. Not to be used for protection against further hazards than defined above. Not to be used within the scope of any other field of activity than that defined in the above-mentioned instructions. A removable insock is provided with this footwear. Testing was carried out on the footwear with the insock in place. Consequently, this footwear must be worn with the insock in place. It may only be replaced by a comparable insock supplied by Delta Plus. This footwear contains no substances known to cause allergic reactions in people with allergic sensitivities.
Instructions for storage:
To be stored in its original packing in a dry place, sheltered from sun li
PPE DIRECTIVE 89/686/EEC
EN ISO 20344:2011
EN ISO 20345:2011 S3 HRO HI CI SRC
EN ISO Personal protective equipment - Safety footwear. 20345:2011
S3 HRO CI HI : Additional special requirements SRC : Resistance to slipping