GOULT II S1P SRC

Description :

Shoes range CLASSIC +. Upper : Pigmented split leather. Lining : Polyamide absorbing. Footbed : Fixed - Polyamide on EVA. Outsole : Injected - Dual-density PU. Anti-penetration insert and safety toe cap : Stainless steel

Materials:

see description

Strong points:

Puncture-proof sole. Shock-resistant and crushproof toe cap (200J). Energy absorber heel. Oil resistant bottom assembly. Slip-resistant studded sole for loose soil. Anti-static protection.

Instructions for use:

General use safety footwear for smooth and oily industrial-type floors or loose ground, for indoor or outdoor use against intermediate risks equipped with a puncture-proof sole and a protective toe cap providing protection against shocks equivalent to 200 joules and against crushing risks under a maximum 15 kN load. S1P*: safety footwear with antistatic protection, energy absorbing heel and puncture-proof sole. Outsole resistant to fuel oil.

Limits to use:

The DELTAPLUS® guarantee can only be applied optimal-condition shoes, being used without adding up any accessories likely to generate a change in protection, or it cannot be applied when its use is not specified in the current instructions for use. Not to be used for protection against further hazards than defined above. Not to be used within the scope of any other field of activity than that defined in the above-mentioned instructions. This footwear contains no substances known to cause allergic reactions in people with allergic sensitivities.

Instructions for storage:

To be stored in its original packing in a dry place, sheltered from sun light.

Instructions for cleaning / maintenance:

After any use, leave unpacked shoes in a ventilated place away from any heat source. To remove clay and dust, use a non metallic brush. For stains, use a wet cloth with soap if necessary. To shoe polishing, use a standard product.

Performances :

Comply with the requirements of the European Directive 89/686, special for ergonomics, harmlessness, comfort, airing and flexibility and with the requirements of the European standards EN ISO 20344:2011 and EN ISO 20345:2011 S1P* SRC (Resistance to slipping on Ceramic and Steel floors, for all types of hard floors for multiple uses indoors or outdoors).

PPE DIRECTIVE 89/686/EEC

EN ISO 20344:2011

EN ISO 20345:2011 S1P* SRC (Resistance to slipping on Ceramic and Steel floors, for all types of hard floors for multiple uses indoors or outdoors).