More info
Product specifications
5 finger knitted glove. Outside Kevlar® / Inside Cotton. Seamless. Ambidextrous. Elastic wrist 10 cm. Quality label DuPont " OutershellFiber 100% Kevlar® ".
Materials:
Outside 100% Kevlar® (short fibers). Inside 100 % Cotton. Kevlar® is a DuPont registered trademark.
Strong points:
Extended or intermittent contact while handling parts. Excellent trade-off between heat resistance and dexterity. Comfortable lining. Ambidextrous. Excellent mechanical resistance. Excellent termal resistance. Seamless. 100% Kevlar®.
Instructions for use:
Protective gloves against mechanical and thermal risks for protection against flame, contact heat, convective heat, small projections of molten metal. For use in dry environments.
Limits to use:
Do not use other than for the purpose defined in the instructions for use below. These gloves do not contain any substances known to be carcinogenic or toxic, nor likely to cause allergies to the sensitive people. Ensure your gloves are intact before and during using its and replace if necessary. * We draw users' attention on the fact that this glove being highly resistant to traction, it must not be used when there is a risk of being snatched by machine moving parts.
Performances :
This glove complies with the European directive 89/686, notably regarding ergonomics, innocuousness, comfort, ventilation and flexibility.
PPE DIRECTIVE 89/686/EEC
EN420:2003+A1:2009 (dexterity 4)
EN388:2003 (1,5,4,X)
EN407:2004 (4,2,X,X,X,X) standards
EN388:2003 Protective gloves against mechanical Risks (Levels obtained on the palm)
1 : Resistance to abrasion (from 0 to 4)
5 : Resistance to cut (from 0 to 5)
4 : Resistance to tear (from 0 to 4)
x : Resistance to perforation (from 0 to 4)
EN407:2004 Protective gloves against Heat & Fire risks (X = Unrealized test)
4 : Resistance to flammability (from 1 to 4)
2 : Resistance to contact heat (from 1 to 4)
X : Resistance to convective heat (from 1 to 4)
X : Resistance to radiant heat (from 1 to 4)
X : Resistance to small projections of molten metal (from 1 to 4)
X : Resistance to large projections of molten metal (from 1 to 4)
EN420:2003+A1:2009 General requirements
